AKG D112 MKII Professional dynamic bass drum microphone
General Specifications
Dimensions
Audio Output
Application
Instrument
AKG CGN99 CS Cardioid condenser gooseneck microphones
General Specifications
Dimensions
Design
Audio Output
Powering Interface
AKG C555 L High-performance head-worn condenser microphone
- 1 x C555 L Head-Worn Microphone
- 1 x W444 Windscreen
AKG C544 L High-performance sports head-worn condenser microphone
- 1 x C544 L Head-Worn Microphone
- 1 x W444 Windscreen
- 4 x Moisture Shields
AKG C519 M Professional miniature clip-on condenser microphone with mini XLR to standard XLR cable
General Specifications
Dimensions
Design
Audio Output
Powering Interface
Application
Instrument
- 1 x C519 Microphone
- 1 x W44 Windscreen
- 1 x Microphone Bag
- 1 x Mini XLR to Standard XLR Cable (3 m/10 ft.)
AKG C451 B/ST Matched Pair Condenser Microphones
Use the AKG C451 B/ST Matched Pair Condenser Microphones for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.The AKG C451 B is a small-diaphragm condenser microphone with the identical acoustical behavior of its predecessor, the legendary AKG C451 EB CK1 capsule, which was a bestseller right from the start in 1969. The AKG C451 B is suited to recording instruments such as drums, percussion and strings.
AKG C451 B/ST Matched Pair Condenser Microphones
The AKG C451 B/ST matched pairs consist of two condenser microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 200 Hz to 15,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.The C451 B stereo set includes all the standard accessories of the individual package along with a stereo bar and proof of performance charts in an attractive carrying case (Soundtool case, middle size).
One for the road
for drums, percussion, acoustic guitar and strings
With its airy sound, high overload limit and improved engineering details, the AKG C451 B continues the success story of this legend. The roadworthy design around the handcrafted capsule and the low-noise preamp electronics ensure impressive results even under very harsh conditions.Responding to growing demand, AKG decided to make the AKG C451 B with the same acoustic performance as the popular original AKG C451 EB CK 1, with dramatically improved specifications. Using an extremely light diaphragm, the new AKG C451 B/ST is almost totally insensitive to handling noise. Other features include an all-metal body for excellent protection from RF interference and high reliability for excellent results under almost all conditions.The AKG C451 B/ST condenser mic is an excellent tool for accurately capturing signals rich in transients such as drums, instruments with a percussive sound, acoustic guitar, or for overhead miking.
The AKG C451 B/ST Condenser Microphone features:
- Identical acoustics to legendary CK 1
- Precise, nearly frequency independent cardioid
- Extremely accurate signal transfer and ruler-flat on-axis frequency response
- Also available as a matched stereo pair
AKG C451 B/ST Condenser Microphone is suitable for:
- Drums
- Overheads
- Recording
- Percussions
- Lectern
- Strings
AKG C451 B/ST Matched Pair Stereo Set Package includes:
- 2 x AKG C451 B condenser mics
- 2 x SA60 Stand adapters
- 2 x Windscreen
- 1 x H50 Stereo mounting bar
- Aluminum carrying case
- Measurement documents
Also available as a single mic?AKG C451 B Condenser
AKG C414 XLS ST Multi-Pattern Large-Diaphragm Condenser Microphone
- Dual-diaphragm 1? edge-terminated transducer
- Nine polar patterns: omnidirectional, cardioid, hypercardioid, figure-8,?wide cardioid, and the intermediate patterns in between
- 134 dB dynamic range (up to 158 dB SPL)
- Lock Mode for live operation?all controls can be conveniently disabled
- Peak-hold LED displays overload peaks
- All-metal body rejects electrostatic and electromagnetic interference
- Three switchable bass-cut filters to reduce wind noise and proximity effect (40, 80, and 160 Hz)
- Three attenuation levels for close-up recording and high-output sources (-6, -12, and -18 dB)
- Elastic capsule suspension minimizes structurally transmitted noise from chassis vibration
- Designed and manufactured in Austria
| Form Factor | Stand/Boom Mount |
| Sound Field | Mono |
| Capsule | Condenser |
| Polar Pattern | Cardioid, Figure-8, Hypercardioid, Omnidirectional, Subcardioid/Wide Cardioid |
| Pattern Selection | Switched |
| Orientation | Side Address |
| Circuitry | Solid-State |
| Pad | -6 dB-12 dB-18 dB |
| High-Pass Filter | 40 Hz80 Hz160 Hz |
| Tone Adjustment | None |
| Indicators | None |
| On-Board Controls | Polar Pattern, High-Pass Filter, Pad |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 140 dB SPL |
| Impedance | 200 Ohms |
| Load Impedance | 2200 Ohms |
| Sensitivity | 23 mV/Pa |
| Signal-to-Noise Ratio | 88 dB A-Weighted |
| Equivalent Noise Level | 6 dB A-Weighted |
| Output Connectors (Analog) | 1 x?XLR 3-Pin (on Mic) |
| Operating Voltage | 44 to 52 V (Phantom Power) |
| Operating Current Consumption | 4.5 mA |
| Color | Gray |
| Mounting | Shockmount (Included) |
| Operating Temperature | 14 to 140?F / -10 to 60?C |
| Dimensions | ?: 1.97 x L: 6.3″ / ?: 50 x L: 160?mm |
| Weight | 10.58?oz / 300?g |
| Package Weight | 5.8 lb |
| Box Dimensions (LxWxH) | 15.6 x 12.2 x 3.9″ |
AKG C411 PP High-performance miniature condenser vibration pickup with MPAV standard XLR connector
General Specifications
Dimensions
Design
Audio Output
Powering Interface
Application
Instrument
- 1 x C411 PP Miniature Vibration Pickup
- 1 x Adhesive Compound
- 1 x Microphone Bag
AKG C111 LP High-performance lightweight ear hook microphone
- 1 x C111 LP Ear Hook Microphone
- 1 x Carrying Bag
- 1 x Windscreen
- 1 x Cable Clip
AKG C1000S Multipurpose Small-Diaphragm Condenser Microphone
AKG C1000 S Overview
-
- Presence-boost adapter offers three discrete frequency settings to add clarity to speech and instrument sounds
- Polar-pattern converter allows microphone pattern to be switched from cardioid to hypercardioid
- Pre-polarized design, gold-sputtered microphone-capsule housing and gold-plated XLR pins make this microphone well suited for portable applications and high-humidity environments
- Switchable low-cut filter at 80 Hz to reduce rumble or wind noises which may cause distortion at low frequencies.
- Switchable 10 dB pad to enable distortion-free recording of very loud sound sources in proximity miking
- If no phantom power is available, the C1000 S can be powered by two standard AA batteries for up to 120?hours
- Sturdy metal chassis and specialized mic clip to keep microphone securely attached to stands
AKG C1000 S Specs
AKAI-MPC X
🎁 FREE GIFT INCLUDED WITH EVERY PURCHASE! 🎁 A complete stand-alone DAW that lets you untether from your PC Everything you loved about sampling and beat-making onboard Delivers a perfect blend of classic loop and modern track production 10.1″ multi-touch screen and all the hands-on controls you need 16 of the best velocity-/pressure-sensitive pads you’ll …
Continue reading AKAI-MPC X
AKAI-MPC ONE
Pads
- (16) velocity- and pressure-sensitive pads, RGB-backlit
- (8) banks accessible via Pad Bank buttons
Knobs
- (4) 360? touch-sensitive Q-Link Knobs
- (4) Q-Link Knob columns accessible via Q-Link button
- (1) 360? encoder for display navigation and selection via push
Buttons
- (31) dedicated function buttons; red-, amber-, or green-backlit
Display
- 7.0? / 177 mm (diagonal)
- 5.9? x 3.7? / 151 x 94 mm (width x height)
- Full-color LED-backlit display with touch interface
CPU
- Processor: Quad-core ARM? processor
RAM: 2 GB
- Storage: 2 GB user storage, 2 GB pre-installed content
Connections
- (2) 1/4? (6.35 mm) TRS inputs (1 stereo pair)
- (2) 1/4? (6.35 mm) TRS outputs (1 stereo pair)
- (1) 1/8? (3.5 mm) stereo headphone output
- (1) 5-pin MIDI inputs
- (1) 5-pin MIDI outputs
- (4) 4 TRS CV/Gate Jacks, 8 Outputs Total
- (1) USB Type-A port
- (1) USB Type-B port
- (1) SD Card slot
- (1) Power Adapter input
Power
- Via power adapter: 19 V, 3.42 A, center-positive, included
Dimensions (width x depth x height)
- 10.7? x 10.7? x 2.1?
- 272 x 272 x 53 mm
Weight
- 4.7 lbs
- 2.1 kg
























